|
|
| Example Model: | FullPro |
| Brand: | Koga Miyata |
| Frame Model: | Koga Miyata FullPro |
| Category: | Road Race |
| Years: | 1981 |
| Built In: | Netherlands |
| Weight: | |
| Production: | Unknown |
| Sold As: | Unknown |
| Material: | Steel |
| Construction: | Lugged |
| Drivetrain: | Derailleurs |
| Wheel Size: | 700c |
| Added By: | Elev12K on 12/01/11 |
| Updated By: | Elev12K on 12/01/11 |
|
| Construction | Lugged | Bottom Bracket | English/ISO: 1.370 x 24 |
| Wheel Size | 700c | Brake Mounting | Recessed |
| Rear Dropouts | Horizontal | Seat Stays | Capped flat, pantographed |
| Main Tubing | Tange 2 | Fork Tubing | Tange 2 |
| Brake Bridge | Reinforced | Fork Style | Curved Blades |
| Derailleur Cable Routing | Brazed-On over BB guides | Brake Guides | 3x Double Loop style on top tube |
| Fork Crown Style | Flat Crown | | |
1981 Koga-Miyata FullPro - full Tange Champion #2
- multiple cut outs and pantographs in lugs, crown, stay caps
- microfusion lugs
- open shell
- Shimano BB cable guides and dropouts and ends
- FullPowerDrive geometry FullPowerDrive (FPD) geometry: This particular FullPro is a size 57DD, where DD denotes Dyna-Drive. Dyna-Drive is Shimano's pedal system
that allows that your feet are positioned in the center of the virtual pedal
axle. As your feet are positioned about 1.5cm lower than on a conventional
pedal, Miyata corrected the frame for use with DD pedals. Hence it has the
length of a conventional 57 frame, but it is a bit lower.
Paintscheme as used by the IJsboerke and Capri Sonne team. The 1981 modelyear FullPro is a full Dura-Ace EX bike. |
